Foshan Teeth-Health Medical Equipment Co.,Ltd

A.Features  

1.Aesthetic and practical design, easy and convenient operation;

2.Brushless driving, no spark interference;

3.Lowest noise and vibration, larger torque;

4. Higher efficiency, lower energy consumption.

B. Application

1. This product is mainly designed for dental laboratory use.;

2. It can be applied for the nail art,jewelry,wood carving and molding use.

C. Specification:

1.RPM:0-36,000;

2.Vin:AC110/220V ； 50/60Hz

3.Vout:DC 0~36V ；

4.Maximum load current:4A

5.Wattage:110V/4A， 220V/2A  ；

6.Max torque:6.8 N·cm

D. Installation and caution

1. Unpack and inspect whether all the accessories are provided.

2.Make sure the power of the controlling box is OFF and then connect the motor and the wire which is controlled by foot with the box.

3.Make sure the voltage marked on the box matches to the one you use,and then connect the electrical socket.

4. For the first use,please turn the speed switch to the minimum.

5.Turn on the power on the box to check whether the power is connect properly.

6.Turn the switch in clockwise to speed up.

7.Choose the rotation direction by Right/Left select button as pushing each time changes from Right to Left.

8.Select whether controlling by hand or foot on the Hand/Foot select button.

9.Make sure the motor is stopped when change for straight handpiece or contra angle.

10.Please do not load an unload the handpiece or the bur when the machine is working.

11.The motor doesn’t need to be refueled,the method of operation for the straight handpiece and the contra angle is same to the one of the low speed handpiece.

E. Check point in case of problem

1.Make sure the output voltage of electrical socket match to the voltage of the box.      

2.Make sure whether the power is ON;

3.Make sure the fuse in a normal condition.

4.Make sure the wires of the power,the motor and one of the foot-controlling switch are connected rightly.

5.Make sure the straight handpiece and the contra angle are connected rightly.

6.Turn off the power of the box.And then start the product once again.

If your products still doesn't work over again after check-up as above,please bring the broken one to our identified agents or after service center.